Program the home in plain language. Ontron writes the KNX.
Describe what a room should do in plain language. Ontron generates the KNX group addresses and DALI zones — collision-free — places the devices on the plan, prices the job, and writes an ETS6-importable group-address CSV. The addressing that used to take an engineer days, done as your staff design. Voice input is coming.
"In the evening scene, dim the cove to 30% and close the blinds."
Collision-free · ETS6-importable CSV
IllustrativePlace it, describe it, export it.
Place devices on the plan
Keypads, dimmers, blind and switch actuators, sensors and DALI gateways, dropped onto the floor plan where they belong.
Describe the behaviour
Scenes, schedules and logic in plain language — "welcome scene", "night off", "evening dims the cove to 30%."
Ontron writes the KNX
Collision-free group addresses, DALI zones, a device schedule and BOQ — as an ETS6-importable CSV for your integrator to import and commission.
KNX first, DALI on the same canvas.
Distribution boards, channels and runs — counted and priced
From the devices on the plan, Ontron works out the distribution boards, actuator channels, line couplers, power supplies and cable runs, and prices them from your catalogue. KNX first, with DALI zones generated on the same canvas, so one plan drives both.
It never writes an address that's already taken.
Import the existing ETS project and Ontron generates only free group addresses, keeping the reserved scene band intact. Anything that would clash is quarantined and flagged for you, not silently overwritten.
2 addresses quarantined
1/1/4 and 1/1/9 already exist in the imported ETS project — left untouched, surfaced for you to resolve.
A priced schedule, computed from the plan.
Every device placed on the plan becomes a line on a priced schedule in your branding — with the boards, power supplies, couplers, cable and commissioning the job needs. Your catalogue sets the prices; nothing is estimated by the AI.
- →Device counts and channels come from the plan, not a guess.
- →Group addresses and the device list as an ETS6-importable CSV.
- →Branded PDF for the client; the group-address CSV for your integrator.
| Item | Qty | Amount |
|---|---|---|
| 4-button keypad | 2 nos | ₹24,000 |
| 8-channel dimmer actuator | 1 no | ₹32,000 |
| Blind/shutter actuator, 4-ch | 1 no | ₹18,000 |
| DALI gateway | 1 no | ₹22,000 |
| Power supply 640 mA + line coupler | 1 set | ₹16,000 |
| KNX cable, enclosure & sundries | 1 lot | ₹8,000 |
| Programming & commissioning | 1 job | ₹20,000 |
| GST 18% | ₹25,200 | |
| Total | ₹1,65,200 |
KNX on Ontron, answered.
Does it export to ETS6?
Who commissions the installation?
What about clashes with an existing project?
KNX only, or DALI too?
Is Ontron a KNX-certified product?
Design a KNX job on the plan. Free.
A 30-day pilot in your showroom. We set up Ontron with your catalogue and branding, then design a real KNX + DALI job on a customer's plan with your staff — addresses, schedule and an ETS6-importable CSV included.
Book the demo